Improve Reliability, Efficiency & Sustainability with Shark® Power Meters and EnergyPQA.com®
Benefits for Commercial/Industrial Applications:
- Cost Savings.
- – Save up to 18-30% of total electrical consumption annually with accurate submetering.
- – Reduce costly peak demand charges with predicted peak demand alerts.
- Sustainability Benchmarking.
- – Analyze energy usage enterprise-wide to identify facility energy inefficiencies.
- – View and improve carbon footprint for all facilities and for the enterprise.
- – Measure success of sustainability initiatives.
- Power Quality Analysis.
- – 30-40% of all facility downtime is power quality related.
- – The Shark® 200/250 meters offer waveform recording, harmonics measurement, and limit alarms for analyzing power quality and taking steps to improve problems before they escalate.
![slide-2 slide-2](https://www.electroind.com/wp-content/uploads/2021/07/slide-2-530x522.png)
![slide-3 slide-3](https://www.electroind.com/wp-content/uploads/2021/07/slide-3-565x396.jpg)
Advanced SCADA Metering for Utilities
Benefits for Utility Applications:
- Revenue Grade Metering.
- – Certified to 0.1% energy accuracy.
- – Test pulse for revenue accuracy testing.
- – Substation capacity planning.
- SCADA Connectivity.
- – Standard open protocols including Modbus, DNP3, and IEC 61850.
- – Compatible with most SCADA system architectures.
- – Support legacy 0-1 mA or 4-20 mA analog retransmits to RTUs.
- – Digitize substations without changing protection schemes.
- Substation Grade for High Reliability.
- – Protect against dangerous substation electrical events.
- – Surge suppression certified to IEEE C37.90.1 and ANSI C62.41.
- – High voltage circuit board clearances.
- – Record waveform faults for forensic engineering event analysis.
- – Direct retrofit for cost effective installation.
- Cyber Security.
- – Use encryption to make assets resilient from unauthorized intrusion.
- – Create an access audit trail.
- – Comply with NERC CIP and other regulatory requirements.
Shark® Series Multifunction Switchboard Meters
![1-Shark-250 EIG’s Multifunction Power Meters](https://www.electroind.com/wp-content/uploads/2021/07/1-Shark-250.png)
Shark® 250 Advanced Power and Energy Meter
![2-Shark-200 EIG’s Multifunction Power Meters](https://www.electroind.com/wp-content/uploads/2021/07/2-Shark-200.png)
Shark® 200 Data Logging Power and Energy Meter
![3-Shark-100 EIG’s Multifunction Power Meters](https://www.electroind.com/wp-content/uploads/2021/07/3-Shark-100.png)
Shark® 100 Multifunction Power and Energy Meter
![4-Shark-100B EIG’s Multifunction Power Meters](https://www.electroind.com/wp-content/uploads/2021/07/4-Shark-100B.png)
Shark® 100B BACnet/IP Power Meter
![5-Shark-50 EIG’s Multifunction Power Meters](https://www.electroind.com/wp-content/uploads/2021/07/5-Shark-50.png)
Shark® 50 Multifunction Electrical Switchboard Meter
![6-Shark-50B EIG’s Multifunction Power Meters](https://www.electroind.com/wp-content/uploads/2021/07/6-Shark-50B.png)
Shark® 50B BACnet Power Meter Communicating MSTP
Shark® Series Multifunction Switchboard Meters
Meter Features | Shark® 50 | Shark® 50B | Shark® 100 | Shark® 100B | Shark® 200 | Shark® 250 |
---|---|---|---|---|---|---|
Accuracy CL | 0.5 | 0.5 | 0.2 | 0.2 | 0.2 | 0.1 |
Freq. Accuracy | 0.01 Hz | 0.01 Hz | 0.01 Hz | 0.01 Hz | 0.007 Hz | 0.007 Hz |
Voltage Range | Up to 721 V AC L-L | Up to 721 V AC L-L | Up to 721 V AC L-L | Up to 721 V AC L-L | Up to 721 V AC L-L | Up to 721 V AC L-L |
Current Class | Class 10 | Class 10 | Class 10, Class 2 | Class 10, Class 2 | Class 10, Class 2 | Class 10, Class 2 |
Advanced Metering | No | No | No | No | Yes, TLC, CT/PT Compensation | Yes, TLC, CT/PT Compensation |
Time of Use | No | No | No | No | No | Yes |
Communication | Optional RS485 | Standard RS485, Ethernet | Standard RS485, Optional Ethernet | Standard Ethernet | Standard RS485, Optional Ethernet – up to 2 cards | Standard RS485, Optional Ethernet – up to 2 cards |
IrDA/USB | No | No | IrDA | IrDA | IrDA | Front USB |
Faceplate Display | Up to 721 V AC L-L | Up to 721 V AC L-L | Up to 721 V AC L-L | Up to 721 V AC L-L | Up to 721 V AC L-L | Up to 721 V AC L-L |
KYZ Pulse | Yes | No | Yes | Yes | Yes | Yes |
Protocol | Modbus RTU/ASCII | Modbus TCP/IP BACnet MS/TP | Modbus RTU/ASCII/TCP, DNP3 Serial | Modbus TCP/IP BACnet/IP | Modbus RTU/ASCII/TCP, DNP3 over Ethernet, IEC 61850 | Modbus RTU/ASCII/TCP, Level 2 DNP3 over Ethernet, IEC 61850 |
Power Supply | (90-265) V AC | (90-265) V AC | (90-265) V AC or (100-370) V DC (18-60) V DC | (90-265) V AC (100-370) V DC (18-60) V DC | (90-265) V AC (100-370) V DC (18-60) V DC | 90-265) V AC (18-60) V DC |
Data Logging | No | No | No | No | Yes, 3 logs | Yes, 6 logs |
Expandable I/O | No | No | No | No | Yes | Yes |
Web Server | No | Yes | No | Yes | Yes | Yes |
Email on Alarm/Data Push | No | No | No | No | Yes | Yes |
Advanced Security | Password Protection | Password Protection | Password Protection | Password Protection | Password Protection/IP Whitelisting | Cyber Secure |
Waveform Recording | No | No | No | No | Yes, 170 Events | Yes, 319 Events |
THD | No | No | Yes | Yes | Yes, to the 40th order | Yes, to the 40th order |
Alarm Limits / Control | No | No | Alarm Limits | Alarm Limits | Yes | Yes |
MV90 Support | No | No | No | No | Yes | Yes |
Ms Timestamp for PQ Reports | No | No | No | No | No | Yes |
![slide-6 EIG’s Multifunction Power Meters](https://www.electroind.com/wp-content/uploads/2021/07/slide-6.png)
Shark® 250
Advanced Power and Energy Meter
Key Features:
- Certified ANSI C12.20 0.1 CL and IEC 62053-22 0.2S energy accuracy.
- High precision frequency measurements – 0.007 Hz.
- NERC CIP compliant Cyber Security, encryption and role-based authorization.
- Advanced metering including TLC, CT/PT compensation, Test Mode, and energy presets.
- Perpetual Time of Use with customizable rate structures.
- Data logging with 6 historical logs of 64+ parameters each.
- Power quality waveform recording – 512 samples/cycle, 319 events.
- 2 separately addressable Ethernet ports – email on alarm/data push/web servers.
- Email on alarm, data push, and IP Whitelisting through Ethernet ports.
- Modbus, Level 2 DNP3, and IEC 61850 protocols.
- Standard front panel USB and multiple RS485 ports.
- MV90 support; millisecond timestamp for accurate CBEMA and SEMI F47 data analysis.
- V-Switch™ keys add functionality in the field.
- Field upgradeable I/O including analog outputs, status inputs, control relays, and pulse outputs.
- Rugged design including IEC610186-1/2/3 (high reliability), improve surge withstand and intrinsically safe current connections.
Shark® 200
Data Logging Power and Energy Meter
Key Features:
- ANSI C12.20 0.2 CL and IEC 62053-22 0.2S energy accuracy.
- High precision frequency measurements – 0.007 Hz.
- Two separately addressable Ethernet ports with embedded web servers.
- Email on alarm, data push, and IP Whitelisting through Ethernet ports.
- Standard IrDA and RS485 ports; Modbus, DNP3, and IEC 61850 protocols.
- Data logging with 3 historical logs of 64+ parameters each.
- Power quality waveform recording – up to 512 samples/cycle, 170 events.
- Transformer line loss and CT/PT compensation.
- V-Switch™ keys add functionality in the field.
- Field upgradeable I/O including analog outputs, status inputs, control relays, and pulse outputs.
![slide-8 EIG’s Multifunction Power Meters](https://www.electroind.com/wp-content/uploads/2021/07/slide-8.png)
![3-Shark-100 EIG’s Multifunction Power Meters](https://www.electroind.com/wp-content/uploads/2021/07/3-Shark-100.png)
Shark® 100
Multifunction Power and Energy Meter
Key Features:
- Direct retrofit for ANSI and DIN cutouts.
- ANSI C12.20 0.2 CL and IEC 62053-22 0.2S energy accuracy.
- Built-in KYZ pulse for accuracy testing.
- Standard IrDA and optional RS485 or Ethernet.
- THD monitoring and up to eight limits for any measured energy value.
- Rugged and safe voltage and current inputs.
- Intuitive design with bright red, three 0.56” line LED display with simple navigation.
Shark® 100B
BACnet/IP Power and Energy Meter
Key Features:
- Advanced functionality for building management system integration.
- ANSI C12.20 0.2 CL and IEC 62053-22 0.2S energy accuracy.
- Built-in KYZ pulse for accuracy testing.
- Standard IrDA and Ethernet port with Modbus TCP/IP and BACnet/IP.
- Web server for configuration.
- 62 predefined BACnet objects.
- Bright red, three 0.56” line LED display with simple navigation.
- Universal ANSI and DIN mounting.
![4-Shark-100B EIG’s Multifunction Power Meters](https://www.electroind.com/wp-content/uploads/2021/07/4-Shark-100B.png)
![5-Shark-50 EIG’s Multifunction Power Meters](https://www.electroind.com/wp-content/uploads/2021/07/5-Shark-50.png)
Shark® 50
Multifunction Electrical Switchboard Meter
Key Features:
- Highly cost effective and designed for OEM deployments.
- ANSI C12.20 0.5 CL and IEC 62053-22 0.5S energy accuracy and
environmental standards. - Built-in KYZ pulse for accuracy testing.
- Optional RS485 port with a fixed KYZ energy pulse mapped to positive energy.
- Rugged and safe voltage and current inputs.
- Intuitive design with bright red, three 0.56” line LED display with simple navigation.
- Universal ANSI and DIN mounting.
Shark® 50B
BACnet Power Meter Communicating MS/TP
Key Features:
- Cost effective for building management system integration.
- ANSI C12.20 0.5 CL and IEC 62053-22 0.5S energy accuracy.
- Built-in KYZ pulse for accuracy testing.
- BACnet MS/TP and Ethernet TCP/IP communication.
- 56 predefined BACnet objects.
- Web server for configuration.
- Bright red, three 0.56” line LED display with simple navigation.
- Universal ANSI and DIN mounting.
![6-Shark-50B EIG’s Multifunction Power Meters](https://www.electroind.com/wp-content/uploads/2021/07/6-Shark-50B.png)
![slide-13 EIG’s Multifunction Power Meters](https://www.electroind.com/wp-content/uploads/2021/07/slide-13.png)
Shark® Transducers
Shark® 100T, 100BT, 200T, or 250T
Key Features:
- Same features as the meter without the display.
- DIN rail mounted.
- Provides an RS485 Modbus or DNP3 output and the expandable I/O (200T/250T).
- Economical solution when no display is needed.
- Great for high density backplane metering.
Shark® Meters in NEMA 1 or NEMA 4X Enclosure
For Shark® 50, 50B, 100, 100B, 200, or 250 Meter
Key Features:
- Extends switchgear capability.
- Pre-wired and configured.
- Eliminates wiring and installation errors.
- Ideal for retrofit meter solutions.
- Indoor (NEMA 1) or outdoor (NEMA 4X) rated enclosures.
- Two options, either:
- 277 V enclosure that comes equipped with a control power transformer.
- (120-240) V enclosure.
![slide-14 EIG’s Multifunction Power Meters](https://www.electroind.com/wp-content/uploads/2021/07/slide-14.png)
![slide-15 EIG’s Multifunction Power Meters](https://www.electroind.com/wp-content/uploads/2021/07/slide-15.png)
Shark® Meters Natively Integrate with EnergyPQA.com®
Next Generation Cloud-based Energy Management System
Key Features:
- Identify poorly performing buildings by comparing energy usage across facilities.
- Reduce demand penalties with predicted peak demand alerts into the future.
- Monitor power quality to prevent downtime, improve efficiency, and reduce liability.
- Perform detailed usage analysis for your complete business with enterprise level dashboards and reporting.
- C-Suite Reports™ analyze and grade all facilities on energy efficiency and risk mitigation.
- Receive email alerts for multiple meter alarm conditions.
- Determine your impact on the environment and sustainability by monitoring carbon footprint.
- Meet corporate IT policies with proven security, encryption, and dual factor authentication.